真尚有,KAMAN電渦流傳感器大牌為你而省

1.深圳市真尚有科技有限公司是激光測振儀、傳感器測控、KAMAN電渦流傳感器、電渦流傳感器x23cae2n等產品專業研發、生產的公司,擁有完整、科學的質量管理體系。 2.深圳市真尚有科技有限公司生產研發的衛星變頻器、衛星變頻器、衛星變頻器、衛星變頻器暢銷消費者市場,在消費者當中享有崇高的地位。真尚有與多家客戶建立了長期穩定的合作關系,高端生產的熱工行業,正品保證、價格合理、物超所值。衛星變頻器作為真尚有的核心業務,致力于成為行業的佼佼者。 延伸拓展 產品詳情: 振動測量系統,利用傳感器將物體振動的物理信號轉化成數字信號或者模擬信號,由控制系統對轉化過的信號進行處理,再根據需要實現一系列的動作。 利用ZLDS10X激光位移傳感器作為振動測量系統的測量部分時,激光位移傳感器將測量到物體的位移變化轉化為數字信號提供給控制系統,控制系統根據傳感器的數據可以還原物體的振動規矩,然后進行報警輸出或者控制生產系統進行相應的調節。 傳感器的采樣頻率對振動軌跡還原起很重要的作用,如果激光位移傳感器在測量振動物體時被設置了一個較低的采樣頻率,就無法精確還原被測體振動軌跡。但只要使用較高的采樣率就可以實現精確的測量。激光位移傳感器的采樣率通常至少設為目標振動頻率的十倍才能基本能達到測量要求,即在目標的一個振動周期內至少得等10個點,才能夠較好的將目標的振動規矩還原,否則數據的可信度就會下降。 振動測量系統的用途: 1、汽車軸承振動監控:汽車軸承振動監控是汽車安全的一個重要指標,電渦流傳感器可配30種傳感器頭,覆蓋量程0.5~60mm,適用于汽車過程自動化各種實際需求。 2、測廢氣鍋輪增壓器振動:兩線制4-20mA振動速度傳感器可直接連接PLC,實時監控振動情況,實現報警輸出。 3、測量風機的震動:ZLDS100激光傳感器監控風機震動,非接觸測量,采樣頻率高,報警輸出,實時監控。 4、測皮帶的震動幅度:激光傳感器實時監控皮帶的震動幅度,實時閉環控制電機調整,避免皮帶脫機的危險 5、測量電梯電機的震動頻率:高頻率實時監控電梯電機的震動頻率,提高電梯的舒適性,延長電梯壽命 6、測機械手的震動位移:激光檢測機械手的震動情況,幫助準確定位 7、車床上加工零件的抖動量:實時監控零件加工過程中的抖動量,保證加工的精度 3.凡是在我公司網站(www.51sensors.com)下訂單并成交的,產品我們終身免費維修。七天無理由退換。保質期一年,還有疑問請與我司聯系:QQ:2247067496,電話:13312970150。
該公司產品分類: 熱工行業

hart475hart475手操器全中文內置哈特貓國家專利產品

  HART475/375手操器包括外殼,液晶顯示,通汛電纜,鍵盤,電源,顯示電路,主控電路,液晶顯示屏依次順序連接,哈特貓接口,,主控電路,hart調制解調器依次順序連接:鍵盤和電纜插口嵌在外殼上.本hart475.375手操器同吋擁有現場手操器通訊功能,和連接電腦HARTmoden通訊功能,且方便攜帶,結構簡單高仿HART375、475手操器,內置哈特貓,獲國家專利,該哈特貓相當于7-8g移動U盤存儲功能, 仿便常用軟件的應用,5V標準USB充電接口, 隨地隨充,5號磷酸鐵鋰防爆電池, 安全可靠, 更換方便, 通訊, 發送, 接收指示燈, 一目了然. 

    HART475除兼容了HART375,275,388功能外,還增加了流量計(電磁.渦街.旋進.靶式.浮筒.金轉流量計等)和溫度變送器校驗,完全可替代進口HART475,而且批發價格是進口產的十分之一

該公司產品分類: 校驗儀表

沂南標典濾業 標典新風 汽車空調濾芯 HEPA系列

 標典濾業有限公司坐落在人杰地靈的諸葛亮故里--沂南。公司誕生于2014年3月,公司經過兩年多的發展,現在已經成為汽車空 調濾清器中的行業領跑者

 

產品包括 :標典新風系列 HEAP高效濾清器,活性炭系列,復合高效空調濾清器、復合高效空氣吸附劑、車載空氣凈化機等等。 公司旗下的“標典新風”牌,汽車空調濾清器是專業針對汽車內空氣領域所做的一系列產品。下面是產品支持的型號需要的客戶可以來電很我們聯系。

 

聯系人:徐經理

電話:15563257609

地址:山東省臨沂市沂南縣界湖街道后中疃村

網址:http://bdktlx.com/

 

現代:全系

大眾:全系

"奧迪:全系

廣汽豐田:全系

豐田:全系

本田:全系

別克:全系

起亞全系

起亞:全系

寶馬;全系                                           

奔馳;全系

標志:全系

進口標致:全系

奇瑞:全系

比亞迪:全系

雪佛蘭:全系

保時捷:全系

雷克薩斯:全系

克萊斯勒:全系

英菲尼迪FX35:全系

傳祺:全系

路虎:全系

雷諾:全系

福特:全系                            

 

馬自達:全系

長安

榮威:

 

新款天籟

新款軒逸  

           

新奇駿                                

12款后新經典軒逸                          

東風日產:

沃爾沃

斯巴魯:

三菱

三菱帕杰羅

長城:

長城H2

江淮同悅

江淮A30

JEEP:07-12款前指南者、自由客(11-15款)

大切諾基

斯柯達:明銳(06-14款)、明銳RS(10-)、昊銳(09-)、速派(13-15款)野帝

斯柯達:晶銳(08-15款)昕銳(13-16款) 昕動、斯柯達明銳(14-)

明銳15-

西雅特: 雷恩LEON 、歐悅搏(13-)

西雅特:伊比颯1.2(13-)

寶駿:630

新款菱悅

東南V6凌仕、V5凌致  

"吉利帝豪:帝豪EC7(1.5, 1.8L)、帝豪EC7-RV ?EC718,EC715

吉利全球鷹:遠景  "

謳歌:MDX/RL3.7,TL3.5

長安鈴木:雨燕、天語SX4(06-13款)

鈴木吉姆尼(07-15款)

鈴木維特拉

凱迪拉克:10--15款凱迪拉克SRX 3.0  

"中華駿捷Cross、中華H330、中華H530、中華駿捷、中華駿捷FRV、 中華駿捷FSV、

中華尊馳、中華酷寶、中華V5  "

大宇旅行家

奔騰:奔騰B50(09-)、B70(06-16)、B90、X80

菲亞特:菲躍

進口道奇:酷威(09-)、酷博(08-)、鋒哲

納智捷:大7 SUV  2.0L?2.2L

雙龍:柯蘭多(長小5毫米)

13后東風風神S30

福田迷迪

勞斯萊斯:古思特(09-)(2片)

捷豹XF 2013款 捷豹F-TYPE 3.0L 5.0L XJ6 XJR XJ8 3.0 3.5 4.2 4.2

五菱宏光S

GMC越野

進口歐寶:Agila 1.0i 12V、1.2i 16V、1.2i 16V(00-)

眾泰T600

華泰圣達菲海馬CX-5

 

該公司產品分類: 空調濾芯

WD 510CWD 510C VGA接口多十字線發生器

 WD 510C VGA接口多十字線發生器

 

WD510C VGA 接口多十字線發生器是一種可產生8根水平線和8根垂直線的十字線發生器,該發生器水平和垂直線條可在0-8根之間任意設定,可以根據用戶需要實現不同功能。輸入模擬視頻信號,輸出為VGA信號可直接接駁電腦用VGA 顯示器。本機提供很細的彩色線條疊加在要觀測的圖像上,用于工業設備的精確定位指示。

顯示的十字線有8種顏色(白、黃、青、綠、紫、紅、藍、黑)可選,本機分辨率為1024X768,線的粗細為一個像素。每根線可以任意調節。

 

 

一、主要特點:

 可產生8根水平線和8根垂直線。

 每根線可以全屏任意移動。

 垂直線和水平線的數量可以任意搭配。

 十字線有8種顏色(白、黃、青、綠、紫、紅、藍、黑)可選。

 十字線的位置可以自動存儲,開機自動調出,方便用戶使用。

 帶有按鍵鎖定功能,防止用戶誤操作。

二、主要參數:

(1) 視頻輸入為標準PAL或NTSC信號制式

(2) 圖像采集最大分辨率:PAL720×576;

                          NTSC720×480

 (3)   圖像輸出分辨率:1024×768(70Hz);

 (4)   輸入接口:      BNC 連接   

 (5)   輸出接口:  VGA D-SUB 15針 

(6) 電源電壓:  5V  DC 

 (7)   電源功率        2.5W

 

 

210mm(寬)×100mm(縱)×70mm(高)

 

 

 

 

該公司產品分類: 無損檢測 印刷檢測儀器 十字線發生器

EUROSTAR 20 digital(歐洲之星)攪拌器(IKA)

IKA EUROSTAR 20 digital(歐洲之星)攪拌器   

       實驗室攪拌器,適用于常規攪拌,處理量最高達15 l (H2O)。轉速范圍為0/30 - 2000 rpm,通過微處理器控制技術自動調節轉速。安全回路設計可確保設備能在馬達堵轉或過載狀態下自動停止運轉?沙掷m(xù)比對攪拌軸的實際轉速和設定轉速,并自動調節轉速偏差。這項功能可保證在實驗過程中轉速的恒定,即便是在樣品粘度發生變化的情況下。 

最大攪拌量 (H2O) 15 l
電機輸入功率 56 W
電機輸出功率 44 W
電機原理 無碳刷直流馬達
轉速顯示 LED
速度范圍 0/30 - 2000 rpm
轉動可逆方向
間歇運行
最大粘度 10000 mPas
攪拌軸最大輸出功率 42 W
允許連續運轉時間 100 %
攪拌軸最大轉矩 20 Ncm
轉速控制 無級
轉速設置精度 1 ±rpm
n > 300rpm時速度測量偏差 3 ±rpm
n < 300rpm時速度測量偏差 1 ±%
攪拌槳固定 轉夾頭
溫度顯示
轉夾頭夾持范圍最小直徑 0.5 mm
轉夾頭夾持范圍最大直徑 10 mm
空心軸,內徑 11 mm
空心軸(停止?fàn)顟B(tài)可插入)
支架固定 延長臂夾頭固定
延長臂直徑 16 mm
延長臂長度 220 mm
轉矩顯示
額定轉矩 0.2 Nm
計時器
外殼材質 鑄鋁涂層 / 熱塑性聚合物
合格的潔凈室
防爆
外形尺寸 86 x 248 x 208 mm
重量 4.4 kg
允許環境溫度 5 - 40 °C
允許相對濕度 80 %
DIN EN 60529 保護方式 IP 40
RS 232接口
USB接口
模擬輸出
電壓 230 / 100 - 115 / 100 V
頻率 50/60 Hz
儀器輸入功率 70 W

該公司產品分類: 真空泵 真空泵 水分/滴定 其他箱體 電動移液器 多道移液器 瓶口分液器 肺活量計 公路儀器 溶氧儀 電導率儀 PH計 PH計/電導儀/溶氧儀 粘度計 物理分析儀器 其他耗材 實驗室手套/口罩/帽子 吉爾森移液器 梅特勒/移液器 芬蘭百得移液器

Huba501HUBA壓力變送器,HUBA501傳感器,瑞士HUBA壓力傳感器

HUBA501 壓力變送器 產品說明:
Bitmap
HUBA501系列壓力變送器利用可靠的陶瓷技術,測量得出校準的和放大的傳感信號,并將其轉換為標準的電流或電壓輸出.提供多種壓力與電氣連接方式.
量       程: 0-40bar;
精       度: 線性度、遲滯性、重復性之和< ± 0.5%    
  響應時間: < 5ms
HUBA501 壓力變送器 產品特點:
結構緊湊
大批量全自動化生產,提供優良的性能價格比
 對極端溫度的高抵抗性
無機械老化現象;
無機械蠕變現象
   
HUBA501 壓力變送器 技術參數
壓力范圍: 相對壓力0-40bar    絕對壓力2.5-16bar
過載壓力: 2倍滿量程;
破壞壓力: 3倍滿量程;0-40bar 最大90bar
壓力連接: 內螺紋G1/4 (O型圈密封);外螺紋G1/4 后部密封(DIN3852/E)
輸出/電源: 輸出:    比例式10 - 90%,  電源:  5 VDC(4.75 - 5.25)  
輸出:    0 - 5 VDC,    電源: 9 - 33 VDC   
輸出:    1 - 6 VDC,    電源: 10.4 - 33 VDC   
輸出:    0 - 10 VDC,   電源: 16.2 - 33 VDC 
輸出:    4 - 20 mA,    電源: 8 - 33 VDC  
電氣連接: 1.5m電纜,DIN EN 175301-803-A型或C型接頭  IP65
工作溫度: -15°C ~80°C
接觸介質材料: 陶瓷 /不銹鋼 1.4305(AISI 303)
密封材料: Viton, EPDM, NBR, silicone
殼體材料: Cover Pa 6
負載頻率: < 50Hz
重   量: 內螺紋50g,外螺紋70g;
外形尺寸 ?36×91.8mm;
測試標準  EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN55022;
HUBA501 壓力變送器 訂貨說明:
本公司所銷售的HUBA511壓力變送器為瑞士進口產品,公司備有常規型號,供貨周期為即時發貨。
如客戶選購產品為特殊型號以及 定制壓力范圍 產品,供貨周期為4-6周,特殊情況6-8周。
HUBA501壓力傳感器 國內常見型號
HUBA501 常規型號 HUBA501 OEM型號 501.99系列
501.9300021 501.9903
501.9310021 501.99036
501.931003 501.99037
501.9310082 501.99045
501.9320031 501.9907
501.99098 501.99071
  501.99098
該公司產品分類: 球閥 風閥執行器 執行器 變送器 防凍開關 水流開關 壓差開關 開關產品 電動球閥 閥門 流量傳感器 風速傳感器 風機盤管控制器 可編程IP網絡DDC 物聯網控制器 可編程DDC 就地型控制器 空氣質量傳感器 溫濕度傳感器 壓力傳感器

KD-1281PS-A人體靜電釋放儀

Normal07.8 磅02falsefalsefalseMicrosoftInternetExplorer4

給我留言或點擊QQ交流,我們會第一時間與您聯系!泉鎮電子用心服務-歡迎您的來電!

全國免費咨詢熱線: – 15618978032 聯系人:左經理

人體靜電釋放器專業生產廠家,客戶至上真誠服務,竭盡全力用心在做-質量看得見

十年專注安防行業,防靜電設備我們做的更專業

產品使用場合

本安型防爆型除人體靜電釋放 消除 泄放 導除 接地 觸摸報警球 裝置 設備適用于:化工廠儲罐區-液氨廠儲罐-加油站-油庫油罐區-油泵房-涂料廠-儲罐區-酒精廠儲罐區-油田采樣口-石油化工廠-冶金廠儲罐區-電廠液氨儲罐-煉油廠油罐區-油罐區采樣口-加氣站-燃油庫-煤礦-防爆車間-防爆倉庫-軍工單位-柴油庫-采油廠等諸多易燃易爆場合

產品銷售路線

銷往山東/河北/河南/安徽/遼寧/山東/江蘇/江西/河北/河南/浙江/遼寧/天津/大連/新疆/甘肅/四川/廣東/廣西/安徽/福建/湖北/湖南/重慶/云南/寧夏/內蒙古/吉林/上海/貴州/陜西/山西等全國各地. .防爆人體靜電釋放器是我公司的專利,我們是遼河油田、錦西石化、新疆烏石化、獨山子煉油廠、塔里木油田、長慶油田、榆林煉油廠等各大石油、石化、油田的指定供貨商

產品技術參數

檢測靜電壓范圍:-15KV+15KV

指示電壓:﹥150V(人體安全靜電壓小于500V

放電時間:≤1S 0.

指示方式:指示燈亮

工作溫度:-40℃~+60

防爆等級:ExiaIIBT4

產品機械參數

觸摸球直徑:Φ100mm

鋼管直徑:Φ63mm

鋼管壁厚:1.2mm

產品高度:1000mm

重量:5kg

產品功能特點

觸控感應,無機械活動部件

整體環氧樹脂澆封,防腐、防水、防潮

防爆觸摸球,安全釋放靜電,人體接觸不產生電擊感

接地線獨立檢測,接地電阻≤55Ω,確?煽拷拥

產品服務承諾

1:凡本公司出售的產品保用期為一年,自出售日起一年內因產品自身機件、材料及工藝造成的質量問題,本公司免費修理

2:凡本公司出售的產品保用期過后仍負責對產品的免人工費修理,以保護客戶的利益。

該公司產品分類: 氣體探測器 高液位報警器 防靜電控制器 靜電接地夾 靜電接地報警器 人體靜電釋放器

HZ-150THZ-150T平板式重型洗輪機 (可定制任意尺寸)

HZ-150T平板式重型洗輪機 (可定制任意尺寸)

 

  150T工程洗車機主要應用于大型建筑工地,煤礦、電廠、港口、碼頭,主要清洗車輛多為半掛車、拉煤車居多。而且大部分車輛重量在100噸以上,拉煤車輛不同于建筑工地土方車,長而且重,所以這種加重型設備,可以根據客戶現場情況進行訂做,長度一般為6米、8米、10米、12米甚至更長,原材料為加重型國標方管(抗壓),控制柜元器件均為正泰或者德力西品牌(大品牌、安全),進口日本名牌紅外線感應器(耐用),配備我廠定制多功能外殼(防水、防爆)。加長重型設備水泵與設備連接管均為鍍鋅鐵管現場焊接,水泵為“南方泵業股份有限公司”特質水泵、“江蘇飛龍泵業”高壓水泵。精良的焊接技術、優質的進口原材料、搭配國際大品牌零配件的有機結合,150T洗車機的地位。

項目

HZ-150T型  (定制型)

長×寬×高

4000×6000×1200mm

清洗方式

車輛自行

清洗選擇

自動、手動

沖洗壓力

4-5kg/c㎡

電源

三相380V   50HZ

功率

15KW

耗水量

循環用水

洗車速度

70-80輛/分鐘

啟動方式

機械感應

排泥方式

直排、人工排

聯系人:陳曉手機:15069790052微信;15069790052/13518655960QQ:1935593123郵箱;1935593123@qq.com網址:http://shop1402678717282.1688.com/
該公司產品分類: 儀器

DW3200          恒溫水浴箱These water baths

恒溫水浴箱These water baths

恒溫水浴箱為實驗室加熱恒溫的常規裝置,廣泛用于微生物培養,恒溫反應,樣品濃縮等。我公司設計生產的DW系列恒溫水浴箱具備以下特點:數顯溫度,PID控制,加熱功率大,升溫平穩,超溫報警且采用不銹鋼材料,耐腐蝕性更強。

產品規格和訂貨指南

產品型號

加熱槽容量

加熱功率

槽內尺寸mm

試管架尺寸mm

價格(元)

DW3200

3L

200W

235 x 135 x 100

210 x 100 x 80

1600

DW6350

6L

350W

300 x 150 x150

260 x 110 x130

2400

DW10650

10L

650W

300 x 250 x 150

250 x 215 x 130

3200

DW20300

22L

1300W

500 x 300 x 150

460 x 265 x 130

5000

DW30650

30L

1650W

500 x 300 x 200

460 x 265 x 180

6200

溫控精度

1.水浴加熱為室溫-99. 2.恒溫誤差:±0.2℃ 

溫控功能

1.設定、實際溫度雙三位數字LED顯示  2.上限溫度保護設定為80   

選配件

備有不同孔徑、不同尺寸、不同數量的托盤和試管架可供用戶選擇

恒溫水浴箱:http://www.yanmoxuan.com/com/dongkangkeji/

該公司產品分類: 氘燈 色譜儀

Phasor系列Phasor系列超聲波探傷儀-美國GE

我公司為GE檢測科技華南授權經銷商,歡迎來電咨詢!公司網址:www.sztmp.com 

Phasor系列超聲波探傷儀提供4款不同型號,具有可升級的特點和優勢。Phasor CV是編碼兼容的傳統超聲波探傷儀,可升級為Phasor 16/16 Weld或16/64 Phasor XS。可通過快速簡便的軟件升級至相控陣Phasor 16/16 Weld或相控陣Phasor XS.無需更換主基板硬件,利用相同的簡單菜單驅動的界面作為Phasor CV模型,不需要培訓。與相控陣傳感器相結合,兩個平臺都可以在更短的時間內,以合理的價格解決您最苛刻的檢測應用要求。

Phasor 16/16 Weld和Phasor XS可以迅速切換到常規UT,這樣檢測員可以使用任何標準的傳感器,評估檢測到的缺陷(定位和尺寸)是否符合指定標準或測試規范的要求。

Phasor CV/DM集相控陣成像設備和傳統的探傷儀于一體,具有相控陣探頭,可以顯著提高腐蝕檢測數據的性。

特色:

 

改進的檢測生產率

下載

 

 
接受軟件條款 close
 
NOTICE – READ THIS  CAREFULLY: THIS IS A LEGAL AND BINDING  AGREEMENT BETWEEN YOU AND LICENSOR. BY INSTALLING THE SOFTWARE, YOU AGREE TO  ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LICENSE (“LICENSE”). IF YOU DO  NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD OR INSTALL THE SOFTWARE. 1. Definitions Unless otherwise agreed to by Licensor, the following terms shall mean: “Documentation” means all material, including all printed material and on-line or electronic documentation (excluding training materials), referencing the Software and Third-Party Software provided hereunder. “Software” means Licensor’s proprietary computer software and software security devices provided by Licensor under this License. “Third-Party Software” means any proprietary computer software owned by a third party that Licensor may provide to you hereunder. 2. License Grant 2.1 Subject to the terms of this License, Licensor hereby grants to you a non-transferrable and nonexclusive license to use the Software and Documentation, including upgraded, modified or enhanced versions provided by Licensor and to use the Third-Party Software, all for your internal business purposes only 2.2 You have no right to (i) lease, rent, transfer, distribute, sublicense, timeshare or allow third parties to access the Software, Documentation or Third-Party Software, nor assign any rights hereunder to a third party without Licensor’s prior, written agreement; (ii) disassemble, decompile, reverse engineer or otherwise attempt to reconstruct or discover the source code of the Software or Third-Party Software; (iii) pledge the Software or Third-Party Software as collateral or otherwise or encumber such Software or Third-Party Software with any lien or security interest; or (iv) remove any product identification, copyright, trademark or other notice from the Software, Documentation or Third-Party Software. If you  believe that you are entitled to reverse engineer the Software as a matter of local law (e.g., the Council Directive of May 14, 1991, of the Council of the European Communities, as amended), you agree that you shall first request technical information from Licensor. You shall use any technical information delivered by Licensor only for purposes of ensuring “interoperability” and compatibility and shall treat such technical information as Proprietary Information (defined below). Any reverse engineering of the Software shall void any warranties or indemnification obligations of Licensor and shall automatically release Licensor from any obligation to provide support services under this or any separate agreement. 2.3  Certain software Licensor provides to you may contain Third-Party Software, including but not limited to “open source” software. Use of the Third-Party Software and its source code may be governed by separate copyright notices and license provisions, which may be found or identified in the Documentation or on the media delivered with the Software and which are incorporated by reference into this License. You shall not modify or combine the Software and/or any Third-Party Software in any manner that could cause, or could be interpreted or asserted to cause, the Software or any modifications thereto to become subject to the terms of any license applicable to Third Party Software. 2.4  Unless otherwise agreed to by Licensor or specified on your accepted Purchase Order, you shall only have the right to install and use a single copy of the Software and Third-Party Software on a single computer workstation for use by a single user, which may be referred to as a “CPU License.” If “Local Area Network License” rights were purchased, you are authorized to install and use by the designated maximum number of concurrent users on any number of I/O access stations for a designated Local Area Network (LAN). LAN is defined as a hard-wired computer network system which inter-connects computers within a building, facility or site. A facility or site is defined as a production factory or plant producing a product or multiple products at a single location. Concurrent users are defined as your employees logged onto the software application at the same time regardless of activity. Use over a Wide Area Network (WAN) is strictly prohibited, except as may be provided by separate agreement resulting from special license negotiations. WAN is defined as any computer network system that inter-connects one or more computers within a building, facility or site to one or more computers residing outside the same building, facility or site. 2.5 You may make one (1) copy of the Software, Documentation and Third-Party Software for backup purposes only. You must reproduce and include all proprietary rights and copyright notices on any backup copies. Except as authorized under this License, no copies of the Software, Documentation or Third-Party Software may be made by you or any third party; provided, however, you may print online Software documentation for its own internal use, provided the maximum number of copies may not exceed the number of users  licensed hereunder. 3. Support Services; Upgrades This License does not obligate Licensor to provide maintenance and support on any  Software or Third-Party Software licensed hereunder. Support services are available under separate agreement. If the Software is an upgrade of a previous version (provided such upgrade was obtained under a separate support services agreement with Licensor or a Licensor authorized distributor), you may use the upgraded Software only in accordance with this License. Licensor will use commercially reasonable attempts to answer your technical support requests concerning the Software during Licensor’s normal business hours; however, this service is offered as a convenience to you, and Licensor may not be able to resolve every support request. For technical support requests, you may contact Licensor, as indicated in the Documentation or Help section of the Software. Licensor reserves the right to charge for customer support services, provided you receives advance notice of all applicable charges. IN NO EVENT WILL GE OR ITS SUPPLIERS BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT, CONSEQUENTIAL, PUNITIVE OR SIMILAR DAMAGES OF ANY KIND RESULTING FROM THE DELIVERY OR NON-DELIVERY OF TECHNICAL SUPPORT SERVICES OF ANY  KIND. THIS INCLUDES, BUT IS NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, DAMAGE TO ANY PARTY\\\\\\\\'S COMPUTER OR OTHER EQUIPMENT AND THE LOSS OF ANY DATA. 4. Verification During the term of this License and for 3 years thereafter, Licensor may upon reasonable notice require that an independent audit of the use of the Software and Third-Party Software be conducted during your normal business hours. Upon such notice, you shall provide Licensor’s independent auditor site access and  the right to inspect relevant portions of your computer system on which the Software and Third-Party Software resides. 5. Term and Termination 5.1 The Software, Documentation and Third-Party Software shall be considered accepted by you upon receipt. 5.2 This License is effective until terminated. Licensor may terminate this License immediately if you fail to comply with any of the terms and conditions herein. Upon termination, you shall (a) cease using the Software, Documentation and Third-Party Software and (b) certify to Licensor within one (1) month of termination that you have destroyed or returned to Licensor the Software, Documentation and Third-Party Software, and all copies thereof. 6. Ownership 6.1 All Software, Documentation and Third-Party Software are licensed and not sold. You agree that Licensor and its suppliers own all proprietary rights, including, but not limited to any patent, copyright, trade secret, trademark and other proprietary rights in and to the Software, Documentation and Third-Party Software, including any Derivative  Works thereof, and any corrections, bug fixes and updates to such Software, Documentation, Third-Party Software or Derivative Works. For purposes hereof, “Derivative Works” shall mean (i) any work that is based upon one or more pre-existing works, such as a revision, enhancement, modification, translation, abridgement, condensation, expansion, extension or any other form in which such pre-existing works may be recast, transformed or adapted, and that, if prepared without the authorization of the owner of the copyright to such pre-existing works would constitute a copyright infringement and (ii) any compilation that incorporates such a pre-existing work. You shall have only a “right to use” license to any Derivative Works in accordance with the terms of this License. 6.2 For the purposes of this Article, the term “Licensor” shall mean Licensor, its  affiliates and their successors or assigns. 7. Limited Warranties 7.1 Licensor warrants, for your benefit alone, that under normal use the media in which the Software is embedded shall be free from defects in material and  workmanship, for a period of one (1) year from the date of delivery of the initial Software (“Warranty Period”). 7.2 Licensor warrants, for your benefit alone, that during the Warranty Period, the  Software will perform substantially in accordance with its Documentation. If, during the Warranty Period, an Error occurs (where “Error” is defined as a problem caused by an incorrect operation of the unmodified computer code in the Software or an incorrect statement or diagram in the Documentation that produces incorrect results), Licensor will use commercially reasonable efforts to correct such Error, provided you furnish Licensor with the following: (a) written notice of the warranty claim,  including a description of the failure to perform in accordance with the Documentation and a specific description of the operating conditions (including the specific software/hardware configuration) under which the failure occurred and (b) to the extent feasible, a representative sample of inputs for repeating and analysing the failure. If Licensor is unable, after commercially reasonable efforts, to correct the Error, your sole remedy shall be termination of this License and a refund of the license fees allocable to the specific nonconforming Software that have been paid by you to Licensor hereunder. 7.3 This Article sets forth the exclusive remedies for all claims based on failure of or defect in the Software and Documentation, whether the failure or defect arises before or during the Warranty Period and whether a claim, however instituted, is based on contract, indemnity, warranty, tort (including negligence) or civil liability, strict liability or otherwise. The warranties provided herein are  exclusive and are in lieu of all other warranties and guarantees whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Without limiting the foregoing, Licensor does not warrant that the Software or Documentation (or YOUR use thereof) will be free from all errors or its use will be uninterrupted. 7.4 Any remedial steps taken by Licensor hereunder shall not extend the applicable Warranty Period. 7.5 Except as expressly authorized by Licensor in writing, all Third-Party Software shall carry only the warranties provided by the owners thereof and Licensor gives no warranties for such Third-Party Software. 8. Proprietary Information; Equitable Relief 8.1 All information concerning or embedded in the Software (including but not limited to source code and training materials), Documentation and Third-Party Software is confidential and shall be considered Licensor’s (or its suppliers’) proprietary information (“Proprietary Information”) whether or not the information is marked as Proprietary Information. The Proprietary Information includes commercially valuable, substantial trade secrets, the design and development of which reflect the effort of skilled development experts and investment of considerable amounts of time and money. 8.2 You acknowledge: (a) any use of the Software, Documentation or Third-Party Software in a manner inconsistent with this License or (b) any other misuse of the Proprietary Information of Licensor (or its suppliers), will cause immediate irreparable harm to Licensor (or its suppliers) for which there is no adequate remedy at law. You agree that Licensor (or its suppliers) shall be entitled to immediate and permanent injunctive relief from a court of competent jurisdiction in the event of any such misuse or threatened misuse by you. The parties agree and stipulate that Licensor shall be entitled to such injunctive relief without posting of a bond or other security; provided, however, that if the posting of a bond is a prerequisite to obtaining injunctive relief, then a bond in an amount equivalent to U.S. $1,000 shall be sufficient. Nothing contained herein shall limit Licensor’s right to any remedies at law, including the recovery of damages from you for breach of this License. 9. Compliance With Laws You understand and recognize that the Software, Documentation and Third-Party Software made available to you hereunder are subject to all applicable trade control laws and regulations. You hereby agree that you will not tranship, re-export, divert or direct the Software, Documentation or Third-Party Software, other than in and to the ultimate country of destination specified on your order or declared as the country of ultimate destination on Licensor’s invoice, except as permitted by applicable laws and regulations. 10. Limitation  of Liability 10.1 The total liability of Licensor, on all claims of any kind (excluding claims for death or bodily injury), whether in contract, warranty, indemnity, tort/extracontractual liability (including negligence), strict liability or otherwise, arising out of the performance or breach of this License or use of any Software, Documentation and Third-Party Software, shall not exceed the price of the specific Software, Documentation or Third-Party Software giving rise to the claim. All Licensor’s liability under this License shall terminate upon the expiration of the Warranty Period, provided that you may enforce a claim of such liability accruing during the Warranty Period by an action timely commenced in accordance with the applicable statute of limitations or statute of repose, but in no event greater than one (1) year after the expiration of such Warranty Period. 10.2 In no event, whether as a result of breach of contract, warranty,  tort/extracontractual liability (including negligence), strict liability, indemnity or otherwise, shall Licensor be liable for loss of profits or revenues, loss of use of the Software, Documentation or Third-Party Software or any associated equipment, interruption of business, cost of capital, cost of cover, downtime costs, claims of your customers for such damages or for any special, consequential, incidental, indirect, punitive or exemplary damages. 10.3 If Licensor furnishes you with advice or assistance that is not required under this License, the furnishing of such advice or assistance will not subject Licensor to any liability, whether in contract, indemnity, warranty, tort (including negligence), strict liability or otherwise. 10.4 For the purposes of this Section 10, the term “Licensor” shall mean Licensor, its affiliates, subcontractors and suppliers of any tier and their respective agents and employees, whether individually or collectively. 11. Dispute Resolution, Governing Law 11.1 If you have your pertinent place of business in a country other than the U.S.,  Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the Philippines, any dispute arising out of or in connection with this License, including any question regarding its existence, validity or termination, shall be referred to and finally resolved by arbitration under the London Court of International Arbitration (“LCIA”) Rules, which Rules are deemed to be incorporated by reference into this clause. The number of arbitrators shall be one unless the amount in dispute exceeds the equivalent of $1,000,000, in which event it shall be three. When three arbitrators are involved, each party shall appoint one arbitrator, and those two shall appoint the third, who shall be the Chairma. None of the arbitrators may be a national or resident of the countries in which either party is organized or has its principal place of business. The seat, or legal place, of arbitration shall be London, England. The arbitration shall be conducted in the English language. In reaching their decision, the arbitrators shall give full force and effect to the intent of the parties as expressed in this License, and if a solution is not found herein, shall apply the governing law of this License. The decision of the arbitrator shall be final and binding upon both parties, and neither party shall seek recourse to a law court or other authority to appeal for revisions of such decision. 11.2 If you have your pertinent place of business in the U.S., Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the  Philippines, any dispute arising out of or in connection with this License, shall be brought in the U.S. District Court for the Northern District of New York, or in the event that court lacks jurisdiction to hear the claim, in the appropriate state courts of Onondaga County, New York, and the parties irrevocably consent to the exclusive jurisdiction of such courts in respect of all such claims. Each party hereby submits to and accepts generally and unconditionally the jurisdiction of those courts with respect to its respective person and property, and irrevocably consents to the service of process in connection with any such action or proceeding by personal delivery to the party or by the mailing thereof by registered or certified mail, postage prepaid to the other party at the address for the party. 11.3 The validity, performance and all matters relating to the interpretation and effect of this License and all further documents executed pursuant to it shall be construed and interpreted in accordance with the laws of (i) the State of  New York, U.S., if you have your pertinent place of business in the U.S. or (ii) England and Wales if you have your pertinent place of business outside of the U.S., excluding its rules on the conflict or choice of laws. If you have your pertinent place of business outside of the U.S., the United Nations Convention on Contracts for the International Sale of Goods shall not apply. 12. Patent Indemnification 12.1 Subject to the terms of this License, Licensor shall indemnify you against any damages, costs and expenses arising out of any suit, claim or proceeding (a “Claim”) alleging that the Software or Documentation infringes a patent in effect in the U.S., an EU member state or country of delivery (provided there is a corresponding patent issued by the U.S. or an EU member state) or U.S. copyright or copyright registered in the country of delivery; provided that: (a) you promptly notify Licensor in writing of any such Claim; (b) you make no admission of liability and gives Licensor sole authority, at Licensor’s expense, to direct and control all defense, settlement and compromise negotiations; and (c) you provide Licensor with full disclosure and assistance that may be reasonably required to defend any such Claim. 12.2 Licensor shall  have no obligation or liability with respect to any Claim based upon: (a) any Software or Documentation that has been altered, modified or revised; (b) the combination, operation or use of any Software or Documentation with other products when such combination is part of any allegedly infringing process; (c) failure of you to implement any update provided by Licensor that would have prevented the Claim; or (d) unauthorized use of Software or Documentation, including, without limitation, a breach of the provisions of this License. 12.3 Should any Software or Documentation or any portion thereof, become the subject of a Claim, Licensor may at its option (a) procure for you the right to continue using the Software or Documentation or portion thereof, (b) modify or replace it in whole or in part to make it non-infringing or (c) failing (a) or (b), take back the Software or Documentation and refund any fees received by Licensor attributable to the infringing Software or Documentation. 12.4 This states Licensor’s entire liability for indemnification for patent, trademark, copyright and trade secret infringement for the Software or Documentation. 12.5 Notwithstanding the foregoing, with respect to any Third-Party Software or portions thereof, only the indemnity of the manufacturer/developer, if any, shall apply. 13. General Clauses 13.1 Software and Third-Party Software licensed hereunder are not intended for use in connection with any nuclear facility or activity without the written consent of Licensor. You warrant that you shall not use or permit others to use Software or Third-Party Software for such purposes, unless Licensor agrees to such use in writing. If, in breach of the foregoing, any such use occurs, Licensor disclaims all liability for any nuclear or other damages, injury or ontamination and in addition to any other legal or equitable rights of Licensor, you shall indemnify and hold Licensor harmless against any such liability. If Licensor agrees in writing to any such nuclear use, Licensor’s special terms and conditions for nuclear applications and protections against nuclear liability shall be attached and incorporated fully herein by reference. 13.2 Licensor may assign or novate its rights and obligations under this License, in part or in whole, to any entity directly or indirectly controlling, controlled by or under common control with Licensor without your consent. You agree to execute such documents as may be necessary to effect the assignment or novation. The delegation or assignment by you of any or all of your duties or rights under this License without Licensor’s prior written consent shall be void. 13.3 If any provision of this License is found to be void or unenforceable the remainder of this License shall not be affected and the parties hereby agree that they will replace any such void or unenforceable provision with a new provision that achieves substantially the same practical or economic effect and which is valid and enforceable. 13.4 This License represents the entire agreement between the parties, and no  modification, amendment or waiver shall be binding on either party unless agreed in writing by the parties’ authorized representatives. 13.5 For direct and indirect U.S. government contracts only, all Software,  Documentation and Third-Party Software provided hereunder shall be considered “commercial items” as defined in FAR Part 2, 2.101 and in accordance with FAR 52.244-6. If the reasonableness of the price cannot be established, if cost or pricing data is required for any other reason, or if the Software,  Documentation or Third-Party Software cannot be considered “commercial items,” Licensor may withdraw the proposal or cancel this License without penalty or other liability. 13.6 Upon request you agree to provide Licensor with a signed copy of this License.
 
page-loader
  close
 
 
 
 
說明 中文 English Français Deutsch 日本語 Português RU Español
Corrosion Erosion Brochure   acrobat-reader         acrobat-reader  
Inspection Technologies Brochure   acrobat-reader   acrobat-reader     acrobat-reader acrobat-reader
Phasor CV Brochure   acrobat-reader acrobat-reader acrobat-reader   acrobat-reader   acrobat-reader
Phasor CV/DM Brochure   acrobat-reader         acrobat-reader  
Phasor PDI Kit Brochure   acrobat-reader            
Phasor Series   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Brochure             acrobat-reader  
Phasor Series Operating Manual   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Overview Flyer   acrobat-reader         acrobat-reader  
Phasor Series Quick Start acrobat-reader acrobat-reader acrobat-reader acrobat-reader        
Phasor XS Data Sheet acrobat-reader acrobat-reader acrobat-reader acrobat-reader acrobat-reader     acrobat-reader
按此下載 Phasor XS Ultrasonic Portable Flaw Detector Software Update

最新產品

熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑